Dako Autostainer User Manual download pdf (Page 39)

Dako Autostainer | User Guide 39

Section 8 | Entering Slide Information

Slides can be programmed from the PROGRAMMING GRID either through the Slides function for

quick programming of total slide count, or through the SLIDE INFORMATION button for entering

specific slide identification information. This section describes both options for programming slides.

Slides Function

Adding Slides

The Slides option expedites programming by reducing the amount of information required to

program a staining run.

1. The S

lides function can be accessed from the PROGRAMMING GRID by moving the

mouse pointer to Slides on the menu bar and pressing the left mouse button.

This selection displays the SLIDE COUNT window for entering the total number of slides

for the current staining run. This function is used to bypass the SLIDE INFORMATION

screen when programming a staining run.

2. Enter the desired number of slides in the text box or use the scroll bar to select the

desired number of slides.

3. Select the OK button to save the entered information. The PROGRAMMING GRID is

displayed and ready for programming.

Select the CANCEL button to escape without saving the changes. The PROGRAMMING

GRID is displayed.

NOTE: Once a run has been set up using the SLIDE COUNT window, slide, tissue or

doctor information cannot be added to the run. Selecting the SLIDE INFO button displays

the SLIDE COUNT window.

NOTE: Slide Identification, Case #, Block ID, Tissue or Doctor Name will not be

associated/displayed in the Programming Grid when the Slides function is used.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 124 125

No comments

Dako Autostainer User Manual Page 39