Dako Autostainer User Manual download pdf (Page 80)

80 Dako Autostainer | User Guide

If more than 32 reagent vials are required by the run, a SECOND RACK button becomes available at

the bottom of the screen.

The buttons and their functions are:

REAGENT LIST

displays a detailed listing of the reagents used in the current staining

run.

displays the SLIDE LAYOUT MAP:LOAD SLIDES screen.

BACK TO GRID

returns to the Programming Grid.

SLIDE MAP

displays the SLIDE LAYOUT MAP:Review Slides screen.

FIRST/ SECOND

RACK

displays the alternate reagent rack when more than 32 reagents are

used in a run. If more than 32 reagents are required for a run, this

button is labeled SECOND RACK and a second rack can be accessed

from this button. The background for the second rack is blue and the

vial positions appear with a “b” prefix (for example, A2b indicates

position A2 in the second/back rack). When the second rack is not

available, this button is labeled FIRST Rack and is grayed out and

inactive.

prints the reagent layout map.

1. The reagent volume displayed in the REAGENT LAYOUT MAP screen includes a dead

volume of at least 200 µL.

2. Load the reagent vials according to the reagent map.

NOTE: Using the Reagent Layout map information, make sure that enough reagent is in

the vials to complete the programmed run and that the reagent rack is properly seated in

its correct location and orientation.

NOTE: Check that the reagent vials have no bubbles on top of the solution. Remove any

bubbles.

Reagent List Screen

To view a detailed listing of the reagents used in the current run, click on the REAGENT LIST button

in the REAGENT LAYOUT MAP screen.

Select the PRINT button to generate a detailed reagent list.

Select the OK button to return to the REAGENT LAYOUT MAP screen.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 124 125

No comments

Dako Autostainer User Manual Page 80